3D Drawing Pen

3D Printing Pen Stereoscopic Drawing 2nd Generation with LCD

A hand-held 3D Printer. It works in much the same way, heating plastic filament and extruding it, only with this device you can create 3D objects totally free-form. You can literally draw in 3D with it! 3D Drawing Pen is the good way to introduce kids about 3D printing under an adult supervision. The only limitation of this device is your imagination!

Freely draw in the air, on a surface or tracing objects on paper!

Features:

- Lightweight and compact design

- Support both ABS and PLA with 1.75mm diameter

- LCD screen can display the filament material and printing temperature

- Stepless speed control

- Controllable temperature

- Easy to maintenance

- Unclogging mechanisms that prevent jamming

- Get into sleep mode itself after 2 minutes of idle time. Safest 3D Pen for you and your family

Specifications:

• Working voltage: DC 5V/2A
• Nozzle diameter: 0.7mm
• Pen colour: Blue, Yellow, Orange, Grey (Choose One)
• Printing filament: 1.75mm ABS / 1.75mm PLA
• Discharging mode: Hot melt extrusion molding
• Molding mode: 3D modelling
• Printing range: Unlimited
• Spinning speed: Adjustable
• Temperature: 60 - 245℃ (Adjustable)
• Item weight: 63g
• Package size: 22 x 14.4 x 5cm
• Package weight: 287g

Package List:

• 3D Drawing Pen x 1
• Power Adapter x 1
• User manual x 1

Operation Instruction:

Plug the adapter cable. 

Choose PLA.ABS filament (show in LCE Screen) by pressing the wire unloading / material selection button.

Press the wire feed button, then the pen starts preheating. When blue light turns on, preheating is done.

Insert filament into the inlet, keep pressing the wire feed button, the filament will feed into the pen by inner motor.

When the filament is extruded out from nozzle, you can start your 3D drawing.

You can freely change the filament extrusion speed by sliding the speed control button.

If you wish to withdraw the filament after drawing, keep pressing the wire unloading button. 

You can adjust the temperature by pressing the temperature control button.

Change Filament:

When changing the filament, make sure to unload the filament totally and cut the end part of filament neatly.

Reminder:

When feeding filament into the pen, only press the feeding button. Do not push or force it as the pen will send the filament automatically. 

Ensure the end part of filament is cut neatly before feed into the pen.

The nozzle/ nib is high temperature area, the highest temperature can reach 245 degree. Do not touch the nib with bare hands or touch others object with the nib.

This devce is suitable for children aged 8 years old and above. Children should use it under the supervision of adults.

For more information, please visit our online store:
3D Drawing Pen/3D Printing Pen/3D Modelling (Drawing, Art, Decoration): http://goo.gl/UeERPF

Follow our Facebook: https://www.facebook.com/imRoboticist

Make your pre-order today to get more discount! 

Contact Now: Mr. Choo 012-7803379